-
Repeater Power Supply – BasicLine BL 560
Facts
- For supply and signal decoupling of 2-wire sensors in safe areas
- Suitable for the most loop-powered transmitters / 2-wire sensors
- 16.5 V supply voltage
- Galvanically isolated, active current output with full 500-ohm load
- No problems caused by channel-tochannel coupling through the power supply
- 6-mm housing requires minimal space
- Highest reliability
- Short-circuit-proof
- CE compliant and UL approved
- 3-year warranty
- Perfect price-performance ratio
Contact: Info@energyedgepetroleum.com
-
VariTrans P 41000 High Voltage Transducer
The VariTrans P 41000 isolation amplifiers have been specially conceived for measurements of bipolar voltages from millivolts to volts. They reliably isolate high potentials at the input circuit. The isolating distances are designed to withstand permanent voltages up to 3600 V AC/DC and fast transients up to 20 kV. Protection against electric shock is achieved through protective separation according to EN 61140 between input and output and power supply. Specially designed for current measurements using a shunt resistor.
-
VariTrans P 41000 TRMS AC/DC High Voltage Transducer
The VariTrans P 41000 TRMS isolation amplifiers have been specially conceived for measurements of bipolar voltages ranging from millivolts to volts. They reliably isolate high potentials at the input circuit. Thanks to the true rms conversion in the transducer, even distorted input signals are captured correctly and output as so-called true rms values.
The isolating distances are designed to withstand permanent voltages up to 3600 V AC/DC and fast transients up to 20 kV.
-
VariTrans P 42000 TRMS AC/DC High Voltage Transducer
The VariTrans P 42000 TRMS isolation amplifiers have been specially conceived for measuring high voltages up to 3600 V AC/DC. They reliably isolate high potentials at the input circuit. Thanks to the true rms conversion in the transducer, even distorted input signals are captured correctly and output as so-called true rms values.
The isolating distances are designed to withstand permanent voltages up to 3600 V AC/DC and fast transients up to 20 kV.
